Vehicle TPMS Information
| Make: | Holden |
|---|---|
| Model: | Captiva 5 |
| Date of Manufacture: | 2006 - 2015 |
| OE Sensor Manufacturer: | Schrader |
| OE Sensor Number: | 22853740 |
| Sensor Frequency: | 433 MHz |
The following sensors are all compatible with: Holden Captiva 5 2006-2015.
REMA TIPTOP AUSTRALIA Configurable and Programmable Sensors
5623995
315 MHz U-Pro Hybrid 1010 Snap-In Sensor
Snap-In 315MHz U-Pro™ - Configurable TPMS Sensor. Requires a TPMS diagnostic tool to configure the sensor for the required ... (more)
Comparative Part Numbers: HTS-A55BC, 72-21-908, 6924478954013,
5624128
Hybrid 2.0 Snap-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
Comparative Part Numbers: HTS-A66DG,
5624130
Hybrid 2.0 Clamp-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
Comparative Part Numbers: HTS-A66DH, 72-21-957, 713012022679,
5624132
Hybrid 2.0 Dual Valve Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only single SKU solution. A dual frequency, configurable and programmable TPMS sensor with dual valve... (more)
Comparative Part Numbers: HTS-A66DD, 21360, 713012022235,
5624134
Hybrid 2.0 Black Clamp-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
Comparative Part Numbers: HTS-A66DK, 21360DK,
Service parts for the Schrader Gen 4 Snap-In style sensor:
5623490
Box Of 10 Replacement Snap-In Valves for Schrader Gen 4
A box of 10 snap-in valves. These valves are self-threading and suitable for use with EU-Pro Hybrid 3.5 and Schrader gen 4 type ... (more)
Comparative Part Numbers: 6-207, 72-20-401, 21060, 5026, 20018, VS-950, 4003116284919, 5628491, 591320, 92-0145,
9250423
Box Of 10 Replacement Clamp-In Valves for Schrader Rev 4
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve... (more)
Comparative Part Numbers: 6-216, 72-20-448, 21051, 5024, 66086-67, VS-925A, 4003116284896, 5628489,
6-203
Box Of 10 replacement Clamp-In Valves for Schrader REV 4
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core. These val... (more)
Comparative Part Numbers: 72-20-458, 21057, VS-925C, 6-203-REM,
5623482
Box Of 10 replacement Clamp-In Valves for Schrader REV 5
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Valve Cap and 1 Valve Core. These valves are suitable f... (more)
Comparative Part Numbers: 6-225, 72-20-473, 5024-10, 66086-67, 34000, 6-225-REM,
You must be logged in to view relearn procedures.
Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.