Make: | Jeep |
---|---|
Model: | Wrangler |
Model Code: | JK;JL |
Date of Manufacture: | 2015 - 2021 |
OE Sensor Manufacturer: | Schrader |
OE Sensor Number: | 68241067AA |
Sensor Frequency: | 433 MHz |
The following sensors are all compatible with: Jeep Wrangler 2015-2021.
5623990
433 MHz U-Pro Hybrid 2010 Clamp-In Sensor
Clamp-In 433MHz U-Pro™ - Hybrid Configurable TPMS Sensor. Requires a TPMS diagnostic tool to configure the sensor for the r... (more)
5623992
433 MHz U-Pro Hybrid 2010 Snap-In Sensor
Snap-In 433MHz U-Pro™ - Configurable TPMS Sensor. Requires a TPMS diagnostic tool to configure the sensor for the required ... (more)
5624128
Hybrid 2.0 Snap-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
5624130
Hybrid 2.0 Clamp-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
5624132
Hybrid 2.0 Dual Valve Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only single SKU solution. A dual frequency, configurable and programmable TPMS sensor with dual valve... (more)
5624134
Hybrid 2.0 Black Clamp-In Dual-Frequency Sensor
U-Pro Hybrid 2.0 Sensor The only dual frequency, configurable and programmable TPMS sensor. 97% of direct TPMS-enabled vehicle c... (more)
5623490
Box Of 10 Replacement Snap-In Valves for Schrader Gen 4
A box of 10 snap-in valves. These valves are self-threading and suitable for use with EU-Pro Hybrid 3.5 and Schrader gen 4 type ... (more)
9250423
Box Of 10 Replacement Clamp-In Valves for Schrader Rev 4
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve... (more)
6-203
Box Of 10 replacement Clamp-In Valves for Schrader REV 4
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core. These val... (more)
5623482
Box Of 10 replacement Clamp-In Valves for Schrader REV 5
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Valve Cap and 1 Valve Core. These valves are suitable f... (more)
You must be logged in to view relearn procedures.
Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.